Industrial 19" Racks - 19" Inch chassis, Tabel Top cases
19” Rack Mountable Subrack
Complete precision is meeting standards
Hinged (Vertical or Horizontal) type Front/Rear
Ventilation options from all sides for better cooling
Weight Carrying capacity upto 25 kgs
19” mounting also available on Telescopic Slides
2U Softline
Elegant design with screw less appearance and soft corners
Side covers are aluminium extruded profiles
Top/bottom cover screw less – groove to groove sliding type
Ideal for Table Top equipments
Softline - Adorn
Uniform ample radius at four corners to keep you unhurt
Front cover screw less
Tilting legs provided for an angular position of Front
Weight Carrying capacity upto 25-30 kgs
Multipurpose- can house both, chassis and card rack
Softline – Springy
Complete flexibility in dimensions.
Extremely light weight rack with soft line corners
Ideal for Table Top equipments
Wall mount version is also available.
Industrial 19" Racks -Accessories to 19” Floor Standing Racks
119” Floor Standing Racks - 41 Series
Cooling Fans with Fan Covers:
These are used for supporting the thermal management. Cooling required for the important equipments can be achieved by fitting fan housing units next to them containing these cooling fans.
Dimension: 4” and 6”
Equipment Support Angels:
Provided to support the equipments either from side or from the bottom depending on the accessories. Suitable for supporting 19" Rack Mounting Equipment in 19" Enclosure.
Lifting Bolts:
These eye bolts are made of forged steel with load bearing capacity of 350 kgs. Four eye bolts are required for each cabinet.
Base Frames:
Base frames are welded steel structures used to provide rigidity. Their height of 60 mm provides additional clearance for introducing cables into the cabinets from below.
Cable Channel:
These eye bolts are made of forged steel with load bearing capacity of 350 kgs. Four eye bolts are required for each cabinet.
119” Floor Standing Racks - 42 Series
PCB Guides:
Made from GFN (Glass Filed Nylon) 30% plastic material. All the pieces are in single lengths and are suitable for 80 mm, 100 mm, 160 mm, 220 mm, and 280 mm deep PCBs. Special feature is that it can take 1.6 mm to 2.4 mm thick PCB without any play in card guide.
PCB Holder / Facia Panel:
This is also made from GFN 30% plastic material. It connect to PCBs and Facia. Made of 2.5 mm Aluminium. Mostly Annodised. Facia Panel consists of PCB holder for Mounting PCBs.
Legs:
Made of plastic. These legs are used for card or instrument racks. Available as 2 flat and 2 with tilts. Weight Carry Capacity: 5 kgs.
Threaded Strip:
These slide into special grooves in the aluminium profile to allow fixing Front panels, Facia and Modules. These strips can be with M 2.5 and M 3 tapped holes. Maximum length 84T Made of M.S or S.S. 304 duly electropolished.
Front And Rear Panels:
Front and rear panels are available for all standard models of card rack and instrument racks. These panels can be of Screw on type or hinged type (hinged either on sides or at bottom).
